Polyurethanes

RIO DE JANEIRO (ICIS)–In just a few years, global automotive majors have switched their focus from a quick, all-electric production to a more hybrid model, an executive at US crude oil major Chevron said on Tuesday. Chris Castanien, global industry liaison at Chevron and lubricant additive expert, said that most automotive majors who had set up target to go all-electric or nearly all-electric by 2030 have dropped those plans as intake among consumers remains slow. This has happened even after authorities in North America or Europe have poured “tremendous amount of money in trying to force everyone” into the energy transition. Castanien was speaking to delegates at the 14th International Summit with the South American Market 2024 organized by specialized publication Lubes em Focus, which focuses on base oils. ICIS is a partner in the event. BILLIONS – BUT THE JUMP IS NOT HAPPENINGAnyone in the lubricants industry would be pleased to see the initially quick transition to electric mobility some authorities had planned is not happening – they are an interested party which would lose out much if ICE engines – combustion engines – ran on fuels would go out of the market. Therefore, Castanien was somehow pleased to list the many plans in the EU and the US which had planned for a quick electric vehicles (EVs) implementation, including the US’ $1 trillion New Green Deal in 2021 or the consequent $67 billion investments contemplated in the CHIPS Act or the $369 billion in the Inflation Reduction Act (IRA). “The US’ EPA [Environmental Protection Agency] had forced a ruling that by 2032 around two thirds of cars should be EVs; the EU issued a ban on ICE engines by 2035 – well, I think those targets will not happen,” said Catanien. “Moreover, now we are seeing a lot of protectionist tariffs against Chinese EVs: we want people to make and use EVs, but we don’t want the Chinese to make them.” The Chevron executive went on to say that the US is still a “long way” to meet its own targets on charging points, for instance, which added to the considerably higher cost of EVs is putting off consumers. And this consumers’ reluctance, he went on to say, is even happening when many jurisdictions are implementing fiscal incentives and rebates for EVs. “In the US, you even get the case of California, where HOVs [high occupancy vehicle lanes] are now allowing EVs even if it’s only the driver inside the car…” he said. Thus, the initial change planned by automotive majors – even with thousands of redundancies of ICE engines engineers – is giving way to a slower implementation of the EV push and mentioned the case of Germany’s major Mercedes. “Only a few years ago, Mercedes said they would be making all vehicles electric by 2030 – they don’t say that anymore. Their updated target is aiming to make 50% of its fleet electrical by that year,” said Castanien. “[US major] Ford has said it is losing $64,000 every time they sell an EV. Tesla was planning a gigafactory in Mexico: they have dropped those plans. The shift towards more hybrid vehicles and not purely EVs is happening – this is a big change.” The automotive industry is a major global consumer of petrochemicals, which make up more than one-third of the raw material costs of an average vehicle. The automotive sector drives demand for chemicals such as polypropylene (PP), along with nylon, polystyrene (PS), styrene butadiene rubber (SBR), polyurethane (PU), methyl methacrylate (MMA) and polymethyl methacrylate (PMMA). Base oils, also called lubricants, are used to produce finished lubes and greases for automobiles and other machinery. The 14th International Summit with the South American Market 2024 runs in Rio de Janeiro on 2-3 July.

02-Jul-2024

SINGAPORE (ICIS)–Here are the top stories from ICIS News Asia and the Middle East for the week ended 28 June 2024. Asia melamine sees uptick on tighter supply; demand recovery uncertain By Joy Foo 28-Jun-24 12:54 SINGAPORE (ICIS)–Asia’s melamine spot market for China-origin product faced some pressure from early June due to lagging demand. China MEG market supported by limited import arrivals By Cindy Qiu 26-Jun-24 12:20 SINGAPORE (ICIS)–China’s monoethylene glycol (MEG) prices rose after falling in June, reflecting supply-demand dynamics, but the price growth may be capped by increasing domestic supply and curtailed downstream polyester production, despite limited import arrivals expected in July. India’s BPA import price surges; freight continues to exert pressure By Li Peng Seng 24-Jun-24 11:53 SINGAPORE (ICIS)–India’s bisphenol A (BPA) average import price hit its highest level in nearly 20 months recently due to firm ocean freight rates, a phenomenon that is expected to persist in the short term as vessel space is likely to stay tight. PODCAST: Asia base oils supply, demand to gradually rise in H2 By Damini Dabholkar 26-Jun-24 18:13 SINGAPORE (ICIS)–Asia’s base oils supply is expected to improve slightly in H2 2024, while a seasonal peak in overall demand is due to kick off in the later part of Q3. INSIGHT: Asia isocyanates H1 performance mixed, poor expectations for Q3 By Shannen Ng 26-Jun-24 14:30 SINGAPORE (ICIS)–Demand in Asia’s import markets for polymeric methylene diphenyl diisocyanate (PMDI) and toluene diisocyanate (TDI) is likely to remain limited in the upcoming summer months of July and August, and the outlook for late Q3 is uncertain. Chemanol to supply methanol to Saudi Amiral project over 20 years By Pearl Bantillo 25-Jun-24 12:52 SINGAPORE (ICIS)–Saudi Arabia's Methanol Chemicals Co (Chemanol) has signed a 20-year deal to supply methanol to the Amiral petrochemical project of Saudi Aramco Total Refining and Petrochemical Co (SATORP).

01-Jul-2024

SINGAPORE (ICIS)–Click here to see the latest blog post on Asian Chemical Connections by John Richardson. China's chemicals producers are said to be focusing on being “nimble and agile” in response to weaker demand growth, ample local supply of intermediate chemicals and increasingly sophisticated end-use markets. This involves producing everything up and down the value chains only when it makes economic sense and increasing the differentiation of grades for a broader range of more sophisticated applications. Local producers are reported to be tripling their range of polyethylene (PE), polypropylene (PP) and polyurethane (PU) grades as they broaden their licensing of technologies. A lot of this differentiation is aimed at supplying chemicals and polymers for higher-value downstream industries such as electric vehicles and batteries. There are said to be plenty of intermediate chemicals available locally that can compete with opportunistic imports. Local producers of intermediates are also reported to be able to make better domestic netbacks than selling overseas. Customers of the local intermediate producers increasingly value reliable suppliers who can provide a wider range of grades, technical services and local currency deals, I’ve been told. The ability of chemicals importers to compete on price alone seems to be under challenge as a sustainable business model. Future winners in China could be the Tier 1 suppliers. These suppliers would make all the grades necessary to serve ever-more sophisticated local end-use markets, which would require constantly successful R&D and good technical services. This points towards China becoming a vast continent-sized market that largely serves itself in speciality chemicals and composites, as well as commodity chemicals. I earlier discussed how self-sufficiency is increasing in commodity chemicals resulting in a pivot by “overseas-based” producers to specialities and composites. China could become just about entirely self-sufficient in commodity grades of PP, polyethylene (PE) and in paraxylene (PX) and ethylene glycols (EG) by 2030. The latter two chemicals are of course pure commodities. Note the above phrase “overseas-based” rather than overseas, as the foreign investors in China are in strong positions to take advantage of this vas and rapidly maturing market. For reasons discussed today, I don’t believe that the pivot by overseas-based producers to specialities and composites will work if it is based on exporting to China. What should the overseas-based producers do? Pretty much forget China as an opportunity as they focus on the rest of the world. And here's the link: https://www.icis.com/asian-chemical-connections/2024/06/chinas-ever-more-sophisticated-chemicals-markets-could-entirely-serve-itself/ Editor’s note: This blog post is an opinion piece. The views expressed are those of the author, and do not necessarily represent those of ICIS.

18-Jun-2024

NEW YORK (ICIS)–US-based coatings producer PPG is seeing robust demand for sustainable products from customers, some of which rely on new, more energy efficient processes, said an executive on Monday. “Across the board there is strong pull… because when you look at [our customers’] narrative to the consumer, everybody is using sustainable advantage as a way to move market share,” said Peter Votruba-Drzal, vice president, Global Sustainability at PPG. “The challenge is to move with the speed and agility that’s required from customer industries. Large, mature industries are transforming right in front of us – the powertrain (EV) transformation in automotive, for example. The same holds when you look at how they will ultimately paint cars in the future,” he added. Votruba-Drzal spoke to ICIS at the New York Stock Exchange (NYSE). The time to get new, more sustainable products to market varies by industry, from being relatively quick – a matter of months – on the architectural coatings side, to longer for automotive, marine, aerospace and packaging, he pointed out. MARINE COATINGSIn the marine sector, the International Maritime Organization (IMO) is targeting a 20-30% reduction in greenhouse gas (GHG) emissions by 2030. “Marine coatings have a lot of sustainability benefits that are being pulled by the industry. The introduction of non-toxic anti-fouling technologies plus the benefits of fouling resistance which improves fuel efficiency over time, helps [shippers] meet their carbon emissions goals and reduces their cost of operation,” said Votruba-Drzal. On 5 June, PPG announced a collaboration with digital maritime sustainability platform RightShip to foster the development and adoption of sustainable marine solutions. PPG has a biocide-free silicone hull coating that helps vessels achieve up to 20% power savings and up to 35% lower GHG emissions versus traditional antifouling coatings, according to the company. SUSTAINABILITY + COST BENEFIT = PREMIUMIn most cases, simply introducing a more sustainable product is not enough to warrant a price premium, he pointed out. “Our customer typically requires improved performance – lower operating cost, less waste, energy efficiency – in addition to the sustainable benefit. We can partner with customers and create mutual value so that we both partake in the financial benefits,” said Votruba-Drzal. However, in other areas such as Europe’s architectural coatings market, consumers are willing to pay more for a more sustainable solution with the same performance, he added. Greener specifications, such as from builders of commercial real estate, are also driving demand for more sustainable products with lower carbon footprints, as building owners seek to achieve certain levels of LEED (Leadership in Energy and Environmental Design) certifications, he said. “If we’re working with a coil coatings customer and can provide a low carbon footprint solution, they win market share in the building,” said Votruba-Drzal. Coil coating is a continuous, automated process for coating metals prior to fabrication. TRANSFORMATION IN COIL COATINGS“In the coil industry, a fascinating transformation has been happening”, and only in the past two years or so, the executive said. Coil coatings operations are moving from using football field-length ovens fired by natural gas, to a much more compact electron beam system of around 30 yards in length, he explained. “You eliminate all of the burning of the fossil fuel and carbon emissions, as it runs off electricity which can be renewable power,” said Votruba-Drzal. “Here is a mature industry of 50-plus years that used to be heavily focused on operational throughput costs on the technology side. Now suddenly all these formulations are changing into electron beam curing. And so it resets the opportunity for market share gains,” he added. PROGRESS ON SUSTAINABILITY GOALSPPG in May 2023 introduced 2030 sustainability goals, including a 50% reduction in Scope 1 and 2 GHG emissions (from operations and purchased energy) and a 30% reduction in Scope 3 emissions (mostly from purchased raw materials) from a 2019 base, validated by the Science Based Targets initiative (SBTi). Source: PPG As of its May 2024 update, it has achieved 10% reduction in Scope 1 and 2 emissions, and a 12% reduction in Scope 3 emissions. PPG has also assessed 97% of key suppliers against sustainability and social responsibility criteria. Scope 1 and 2 emissions account for only 4% of PPG’s total carbon footprint. Further reductions to Scope 1 and 2 will primarily come from replacing motors and equipment on mixers, and using more renewable power. The bulk comes from Scope 3 emissions, with the primary components being raw materials, and how paint shops use PPG’s products, said the executive. Often the location of a supplier’s facility plays a key role in the carbon footprint of the products coming out of that site, he pointed out. “You can have a material made by a manufacturer that has operations in Asia as well as in other regions, that tie into very different electrical grids. And how green that grid is, basically impacts the carbon footprint associated with that product,” explained Votruba-Drzal. With global operations, PPG can also provide the same product at different levels of carbon footprint, depending on where it makes it, and ships it from, he added. RECYCLED AND BIO-BASED RAW MATERIALSPPG also uses recycled and bio-based raw materials in certain formulations. Its Mexico coatings company Comex uses recycled tires as a filler for waterproof roof coatings. Recycled polyethylene terephthalate (R-PET), acrylics, elastomers, polyurethanes and polyolefins can all be incorporated into coatings, he noted. “This is an emerging space of circularity where getting the scale matters,” said Votruba-Drzal, who pointed to partnerships between companies to develop new technologies and ecosystems. Interview article by Joseph Chang

17-Jun-2024

SINGAPORE (ICIS)–China has slammed EU’s proposal to impose provisional tariffs on imports of Chinese electric vehicles (EVs), denouncing it as a "blatant act of protectionism”, raising concerns that a trade war between Asia’s biggest economy and a new western front is brewing. EU tariffs on Chinese EVs to rise to 27-48% Retaliatory measures from China likely EU imports of China cars surge sevenfold over three years "The European side has disregarded facts and WTO [World Trade Organization] rules, ignored China's repeated strong opposition, and ignored the appeals and dissuasion of multiple EU member state governments and industries," China’s Ministry of Commerce said in a statement issued late on 12 June. The European Commission on 12 June notified Chinese automakers, including EV giant BYD, Geely, and state-owned SAIC Motor Corp, that it will impose additional provisional tariffs of 17% to 38% on imported Chinese EVs from around 4 July. These will be applied to existing 10% tariffs imposed on all Chinese EVs, with the final rate determined by each carmaker's level of cooperation with EU's anti-subsidy investigation launched in September last year. NEW FRONT FOR TIT-FOR-TAT TRADE WAR China’s commerce ministry has urged the EU to "immediately correct its wrong practices" and "properly handle trade frictions through dialogue and consultation". The ministry said it will "resolutely take all necessary measures to firmly defend the legitimate rights and interests of Chinese companies". "This move by the European side not only harms the legitimate rights and interests of the Chinese electric vehicle industry but will also disrupt and distort the global automotive industry chain and supply chain, including the EU," it said. The EU's move follows the US' tariff hikes announced last month on Chinese imports of EVs, batteries and other materials, starting 1 August. In 2018, then US President Donald Trump initiated a trade war with China by imposing tariffs on Chinese imports to address alleged trade imbalances, intellectual property theft, and unfair trade practices. China retaliated with tariffs on US goods, escalating tensions between the two biggest economies in the world. While reviews by the US and EU on Chinese goods were under way, Beijing launched in May an anti-dumping investigation into imported polyoxymethylene (POM) copolymer, also known as polyformaldehyde copolymer – a key material in electronics and automotive manufacturing. China's commerce ministry alleged that the plastic is being sold below market value, harming domestic producers. The probe, targeting imports from the US, EU, Taiwan, and Japan, could last up to 18 months and is seen as a direct response to their recent trade barriers against Chinese goods. In the case of Taiwan, China has also suspended tariff concessions on 134 more products from the island, including base oil, chemicals, and chemical products, citing Taiwan’s supposed violations of the Cross-Strait Economic Cooperation Framework Agreement (ECFA) with the mainland. Meanwhile, Japan’s tightened export controls on 23 types of semiconductor manufacturing equipment that took effect on July 2023 was deemed in line with restrictions imposed by the US and the Netherlands, potentially hindering China's access to advanced chipmaking technology. China may issue further retaliatory measures, potentially impacting global supply chains and escalating trade tensions with major economies in the west. The automotive industry is a major global consumer of petrochemicals that contributes more than one-third of the raw material costs of an average vehicle. The automotive sector drives demand for chemicals such as polypropylene (PP), along with nylon, polystyrene (PS), styrene butadiene rubber (SBR), polyurethane (PU), methyl methacrylate (MMA) and polymethyl methacrylate (PMMA). CHINA 2023 CAR EXPORTS TO EU SURGE China’s exports of automobiles to the EU have surged over the past year, particularly in the battery electric vehicle (BEV) segment, according to Nomura Global Markets Research. Cars produced in China accounted for 20% of all BEV registrations in the EU during the first two months of 2024, it said, citing data from automotive business intelligence firm JATO Dynamics. An analysis of January-April 2024 sales figures from China’s top three EV manufacturers in the EU, however, suggests that their overall presence in the region is still nascent, Nomura noted. In 2023, EU’s imports of Chinese EVs surged to $11.5 billion, more than sevenfold increase from $1.6 billion in 2020, according to think thank Rhodium Group. China accounted for 37% of EU’s total EV imports last year, it said. In the first quarter of 2024, about 40% of China’s EV exports or 145,002 units went to Europe, according to official customs data. Focus article by Nurluqman Suratman Thumbnail image: An electric car at a charging station near the European Commission building in Brussels, Belgium. (Xinhua/Shutterstock)

13-Jun-2024

LONDON (ICIS)–Germany’s auto industry is opposed to tariffs on electric vehicles (EVs) from China, trade group German Association of the Automotive Industry said on Wednesday. The group, known as VDA in its German acronym, was reacting to a European Commission proposal of tariffs on battery electric vehicles (BEVs) from China after an investigation concluded they benefited from unfair subsidies. VDA said the proposed tariffs were not the right tool to strengthen the competitiveness of Europe’s auto industry. Instead, the tariffs would further escalate the risk of trade conflicts, to the detriment of Germany’s automakers, it said. “The fact is that we need China to solve global problems,” in particularly in dealing with the climate crisis, it said. China played a crucial role in a successful transformation towards electromobility and digitalization, and a trade conflict would jeopardize this transformation, the group said. However, VDA added that the extent of the subsidies China grants EV makers was “a challenge” for Europe and it called on China to make “constructive proposals” to settle the dispute. Germany ranks first in Europe and second after China globally in terms of EV production, and the bulk of German EV production goes into export, according to VDA data released this week. Industry observers have noted that Germany-based EV production relies on imports of materials and batteries from China. The US last month announced tariff hikes on Chinese imports of EVs, batteries and other materials, starting 1 August. In related news, the business climate in Germany’s automotive industry deteriorated in May amid fears about impacts on German automakers from the conflict with China, according to a recent survey by Munich-based ifo research. The automotive industry is a major global consumer of petrochemicals that contributes more than one-third of the raw material costs of an average vehicle. The automotive sector drives demand for chemicals such as polypropylene (PP), along with nylon, polystyrene (PS), styrene butadiene rubber (SBR), polyurethane (PU), methyl methacrylate (MMA) and polymethyl methacrylate (PMMA). Additional reporting by Graeme Paterson Please also visit the ICIS topic page Automotive: Impact on chemicals Thumbnail photo shows a Volkswagen EV; photo source: Volkswagen

12-Jun-2024

BARCELONA (ICIS)–MOL’s €1.3bn polyols project helps move the company’s balance from transport fuels towards chemical production, according to Peter Csaszar, the company's senior vice president, chemicals. Long-term, Hungary’s MOL will move towards chemicals as demand for transport fuels declines Russia-Ukraine war raised importance of energy security Commercial scale start-up of polyols project by end summer-early autumn On-spec commercial production expected by end 2024 Production targeted at Europe Europe chemicals still suffering, improvement expected by 2025 MOL has 35-year contract to manage Hungary’s municipal waste Waste provides feedstocks for recycling, energy recovery New EU parliament must make industrial policy a top priority In this Think Tank podcast, Will Beacham interviews ICIS Insight Editor  Peter Csaszar, senior vice president, chemicals for MOL and Paul Hodges, chairman of New Normal Consulting. Editor’s note: This podcast is an opinion piece. The views expressed are those of the presenter and interviewees, and do not necessarily represent those of ICIS. ICIS is organising regular updates to help the industry understand current market trends. Register here . Read the latest issue of ICIS Chemical Business. Read Paul Hodges and John Richardson's ICIS blogs.

05-Jun-2024

SAO PAULO (ICIS)–Stellantis’ facilities in Argentina remain shut and its plant in Goiana, northeast Brazil, has also partially stopped, a spokesperson for the global automotive major said to ICIS on Friday. In Argentina, Stellantis operates production facilities in Ferreyra, in the Cordoba province in the north, where trade with Rio do Grande do Sul is commonplace. The company said in mid-May those facilities had to shut due to the lack of inputs. On Friday, it added Goiana has now been affected too and it is partially out of operations. “Both plants in Argentina are still out of production. In Brazil, Goiana facilities has partially stopped,” the spokesperson said. Stellantis is the result of the merger between Fiat Chrysler and PSA Group. Germany’s automotive major Volkswagen stopped production at three plants in the state of Sao Paulo in mid-May due to the lack of inputs. The company had not responded to a request for comment at the time of writing. Rio Grande do Sul is Brazil’s southernmost state and petrochemicals-intensive automotive parts producers there are major suppliers to the rest of Brazil and Argentina. As of Friday, the emergency services in Rio Grande do Sul said 169 had died due to the floods, while 44 remains unaccounted for. Nearly 40,000 people are still taking refuge in shelters, while 580,000 remain displaced from their homes. Nearly 2.4 million have been affected by the floods. Earlier in May, a spokesperson for Brazil’s automotive trade group Anfavea did not respond to questions from ICIS about the impact of the floods on the sector's annual output. However, it said the trade group would publish its first estimates at a press conference on 6 June, when it will publish production, sales and export data for May. In early May, at the press conference presenting April data, the trade group said it feared the sector could be hit given Rio Grande do Sul's importance to Brazil's auto industry. The petrochemicals hub of Triunfo, near Porto Alegre, returned to operations on 20 May, led by Brazil’s polymers major Braskem, but a consultant in Porto Alegre said to ICIS the reopening there was the odd one out amid widespread disruption for most industrial sectors. As of Friday, the Port of Porto Alegre, the state’s largest city, remained shut, although Rio Grande and Pelotas ports were operating normally. The emergency services in Rio Grande do Sul said 169 had died due to the floods, while 44 remains unaccounted for. Nearly 40,000 people are still taking refuge in shelters, while 580,000 remain displaced from their homes. Nearly 2.4 million have been affected by the floods in the 12-million people state of Rio Grande do Sul. The automotive industry is a major global consumer of petrochemicals, and chemicals make up more than one-third of the raw material costs for an average vehicle. The automotive sector drives demand for chemicals such as polypropylene (PP), along with nylon, polystyrene (PS), styrene butadiene rubber (SBR), polyurethane (PU), methyl methacrylate (MMA) and polymethyl methacrylate (PMMA), among others. Front page picture: Stellantis' facilities in Ferreyra, province of Cordoba, Argentina; archive image Source: Stellantis 

31-May-2024

SINGAPORE (ICIS)–A severe shortage of containers and vessel space as commercial ships take a much longer route to avoid the Red Sea has sent freight rates skyrocketing in recent weeks, artificially propping up petrochemical prices even as demand remained generally weak. Some sellers offer on free on board (FOB) basis but no takers Freight costs for Chinese exports more than double India may suffer near-term shortage of select petrochemicals Across markets in Asia in recent weeks, industry players’ lament boils down to this exasperated hyperbole: “The freight rates are killing us!” It takes the fun out of witnessing some initial signs of recovery in external demand for global manufacturing giant China. Whatever export competitiveness Asia gained from having weaker currencies against the US dollar is being undermined by the high cost of shipping out of the region. The Chinese yuan recently fell to a six-month low, while the Japanese yen continues to trade at multi-year lows against the US dollar, which is firmly supported by higher-for-longer interest rates. Overseas demand for Chinese products, including petrochemicals, seems to be improving, but actual trades are being hampered by logistics woes stemming from the Red Sea crisis in the Middle East. Attacks on commercial ships have continued in the key shipping lane that connects Asia to Europe, the latest being on an oil tanker bound for China. Rerouting of ships to the Cape of Good Hope meant longer voyage times and much slower turnover of vessels and containers, thereby, creating a strong pressure on freight rates, which may persist for most of the year. “The race for capacity appears to have started, with shippers showing strong demand due to shippers moving significant cargo in the first four months of 2024 to avoid potential Q3 constraints​​,” Richard Fattal, chief commercial officer of London-based freight forwarder Zencargo said in a note on 20 May. “Combined with an average of 5% ongoing blanked sailings, there is a looming future of tighter capacity, higher rates and sellers’ market swings ahead,” he said. “With capacity shrinking in the face of resurgent port congestion, driven by equipment shortages in China and longer routes around the Cape of Good Hope,” Fattal said. For Q2, Zencargo is projecting more than a 13% contraction shipping capacity on the Asia-Europe routes compared with Q3 2023, “with alliances cancelling 5% of sailings between weeks 20 and 24 [H2 May to H1 June]”. “The effective capacity to Northern Europe, based on actual vessel departures from Asia, has decreased by 5.1% compared to a year ago,” it said, citing “the longer route taken by the majority of vessels via the Cape of Good Hope, despite a 17.8% increase in vessel capacity on the Asia-North Europe route”. For the Asia-Mediterranean route, however, the overall capacity has “increased by 10.5%, even with the diversions via the Cape” due to a 49.1% increase in total deployed capacity on this route compared to a year ago”, Zencargo said. WEST BUILDING WALLS AGAINST CHINA TRADES The July-September period is the peak season for Chinese shipments to the west, ahead of the Christmas season in December, according to Wang Guowen, director at Shenzen Logistics and Supply Chain Management Research. Possibly driving up US’ overall demand for Chinese goods, which exerts upward pressure on shipping costs, is the impending tariff hike on imports of selected products from China, including electric vehicles (EVs) and battery materials. For Chinese EVs, the US import tariffs would quadruple to 100% from 1 August, which is tantamount to a ban. European countries appear to be considering similar protectionist measures against China, whose overcapacity is deemed to be killing domestic industries in the west. “Western countries' implementation of tariffs and tax structures on Chinese-manufactured automotive and EV exports is anticipated to significantly impact the shipping sector by potentially reducing vessel demand,” online container and leasing platform Container xChange said in a recent note. To bypass these trade barriers, Chinese automotive and EV makers “are accelerating efforts to internationalize their manufacturing, assembly, and distribution processes”, it said, adding that “immediate effects are already evident, as manufacturers are hastening to ship EVs to avoid impending tariffs and uncertainties”. In the global petrochemical scene, manufacturing facilities in the US and Europe, as well as in parts of northeast Asia are shutting down amid China’s overcapacity. Technically, reduced production elsewhere would open up new markets for China’s excess capacity, if not for the surging freight rates, which further deter trades while demand recovery remains fragile. China’s overall exports have remained soft, posting low single-digit annualised growths in three of the first four months of 2024, with one month in contraction. HEADACHE FOR INDIA PETROCHEMICAL IMPORTERS Petrochemical end-users in India are facing long waiting time to get their hands on imports from China. “Now, no shipping lines will confirm fresh Q2 shipment booking, even after dishing out quotes that are three to four times higher than Q1,” an India-based styrene butadiene rubber (SBR) importer said. A phenol trader said: “June vessel arrangements are more troublesome this year because of the Red Sea issues and also China's exports have been weak especially in the past two months, so fewer vessels are being arranged to China.” India is possibly facing a near-term shortage of purified terephthalic acid (PTA), since northeast/southeast Asian suppliers are struggling to export to the south Asian market. Freight rates from both Taiwan and Thailand to India nearly doubled from April, with voyage time for some shipments taking as long as 90 days, up from the usual 30-40 days. For polyethylene (PE) and polypropylene (PP), cargoes from the Middle East heading to the south Asian markets of India and Pakistan are also being delayed, amid congestion at the ports of Salalah in Oman, Dammam in Saudi Arabia and Jebel Ali in the UAE. For polymeric methylene diphenyl diisocyanate (PMDI) of northeast Asian origin, offers to India have spiked amid tightened regional supply, with delays in getting cargoes from South Korea. SURGING SHIPPING COSTS KILLING SPOT TRADESSpot petrochemical trades are being stalled by constantly changing freight rates on a weekly basis. In the polypropylene (PP) market, some Chinese suppliers have stopped offering on a cost, insurance and freight (CIF) basis, and will only offer on FOB basis because of the risks. For the China-to-Vietnam and the Vietnam-to-Indonesia routes, freight rates have nearly tripled, market players said. Buyers are less willing to discuss on an FOB basis, unwilling to shoulder an expected high cost since most of them do not have their own regular shipper. For soda ash, offers of Turkey-origin dense grade cargoes for 1,000-tonne lots to southeast Asia for Q3 shipments rose to around $300/tonne CFR, up by $20-30/tonne compared with May shipments. Importers of the material across Asia were largely staying on the side lines, with some of them experiencing delays in receiving Turkish cargoes. “Discussion levels are firming up due to freight costs,” said an end-user, adding that the “Red Sea issue is getting worse and lots of shipments from Europe and USA are stuck.” The same is true for the southeast Asian PE market given delays in arrivals of Middle East-origin cargoes and amid perceptions of shorter supply. In the oxo-alcohols markets, producers in Asia are under strong pressure to offload cargoes at lower prices given difficulty in moving volumes to their usual export outlets. Freight rates on chemical tankers are also on the rise amid the Red Sea crisis, sources from Asia’s monoethylene glycol market, resulting in postponing of cargo-loading by some producers. “The freight rates are quite high now, and we have to optimize our vessel availability,” a major MEG producer said. FURTHER FREIGHT SPIKES LIKELY IN JUNE H2 is typically “a busier, more competitive, and profitable season for the shipping industry”, with many container sellers are “currently holding onto their inventory” in anticipation of better demand, said Christian Roeloffs, co-founder and CEO of Container xChange, in a note in May. "In an environment of heightened market volatility and encouraging demand recovery for global trade, container traders are gearing up for the second half of 2024, where we expect a cyclical rise in demand,” he said. “This combination of heavier-than-expected demand for freight and anticipation of further demand surges in the second half of 2024 is driving up container trading prices in China,” Roeloffs added. In a recently conducted survey of container traders and leasing companies by Container xChange, it noted that a majority of the respondents reported “extremely high prices for 40 ft high cube containers in China”. On 21 May, the average one-way leasing rates quoted in the market rose to as high as $2,480 for 40 HC in China for US-bound shipments, more than double the rate at the start of the month at around $950, it said. With ceasefire between Israel and Palestinian militant Hamas in Gaza proving elusive and the threat of a wider Middle East conflict still hanging, it looks like high freight rates are here to stay for an extended period. Insight article by Pearl Bantillo With contributions from Nurluqman Suratman, Fanny Zhang, Nadim Salamoun, Judith Wang, Helen Lee, Ai Teng Lim, Samuel Wong, Julia Tan, Izham Ahmad, Jackie Wong, Shannen Ng, Helen Yan and Clive Ong

29-May-2024

SINGAPORE (ICIS)–Asia's propylene market will continue to see weak demand, although potential curbs in plant run rates in China amid weak margins could lend market support. Downstream, China’s propylene oxide (PO) import demand may continue to be adversely impacted by domestic start-up capacities, while demand in the main downstream polyols sector is unlikely to recover in the second quarter. South Korea June-loading propylene volumes likely to increase month on month Domestic Chinese PO start-ups to keep domestic supply lengthy, hampering import demand Global PO supply ex-China remains tight; downstream polyols likely muted in Q2 In this chemical podcast, ICIS editors Julia Tan and Shannen Ng discuss trends in the Asian propylene and PO markets. (This podcast first ran on 9 May.) Visit ICIS during APIC ’24 on 30-31 May at Booth 13, Grand Ballroom Foyer of the Grand InterContinental Seoul Parnas in South Korea. Book a meeting with ICIS here.

27-May-2024