News library
Subscribe to our full range of breaking news and analysis
Viewing 1-10 results of 57604
Ammonia06-Nov-2024
HOUSTON (ICIS)–Nutrien said demand in North
America for the fall fertilizer application has
been supported by a relatively early harvest
along with the need to replenish soil nutrients
following a period of lower field activity in
the third quarter.
In its latest market outlook, the Canadian
fertilizer major said favorable growing
conditions in the US have supported
expectations for record corn and soybean yields
and significant soil nutrient removal in 2024.
The company did note that prospective crop
margins have declined compared to the
historically high levels in recent years,
however Nutrien’s view is most growers in the
key region of the US Midwest remain in a
healthy financial position.
One positive factor that the producer sees is
that global grain stocks remain below
historical average levels which support export
demand for North American crops and firm prices
for key agriculture commodities such as rice,
sugar and palm oil.
Looking at crop nutrient, Nutrien said it has
raised 2024 global potash shipment forecast to
70 million – 72 million tonnes primarily driven
by stronger expected demand in Brazil and
Southeast Asia.
The company said it believes the increase in
global shipments this year has been driven by
an underlying increase in consumption in key
markets.
The forecast for global potash shipments in
2025 is between 71 million – 74 million tonnes,
which Nutrien said supported by the need to
replenish soil nutrient levels and the relative
affordability of potash.
It does anticipate limited new capacity next
year and the potential for incremental supply
tightness with demand growth.
Regarding global ammonia the producer said
prices have been supported by supply outages,
project delays and higher European natural gas
values.
For urea Nutrien said that Chinese export
restrictions, production challenges from major
exporters and strong demand from India and
Brazil have tightened the global urea market.
It noted that US nitrogen inventory was
estimated to be well below average levels at
the end of the third quarter, and the company
is expecting it will support demand in the
fourth quarter of 2024 and early 2025.
For global phosphates, the situation remains
tight which is furthered by Chinese export
restrictions and production outages in the US.
Nutrien said it anticipates some impact on
global demand due to tight supply and weaker
affordability relative to potash and nitrogen.
Polyethylene Terephthalate06-Nov-2024
HOUSTON (ICIS)–Several ICIS market experts
share insightful facts related to their
respective plastics markets, amid conversations
with industry professionals at PackExpo ’24.
Though each market comes with a host of
uncertainties, the broader US plastic packaging
industry continues to navigate mixed demand and
various supply challenges in 2024 and beyond.
Bottled beverage sector made up 15% of all
US packaging revenue in 2023.
US polyethylene terephthalate (PET)
production to remain 3 billion lb short of
domestic demand in 2025.
US polystyrene (PS) production has been
impacted by outages since July 2024.
US polypropylene (PP) prices have been
volatile, with price movements 11 out of the
last 12 months.
US polyethylene (PE) inventories are the
highest they have been since May 2023.
US recycled PET (R-PET) market facing
onslaught of imports. 2Q2024 PET scrap import
volumes were above 125 million lb.
PackExpo runs through 7 November and is hosted
in Chicago, Illinois.
Ethylene06-Nov-2024
HOUSTON (ICIS)–Chemical trade groups in the US
urged President-Elect Donald Trump to pursue
policies that would support more domestic
production and provide regulatory certainty.
“Chemistry enables affordable housing, reliable
infrastructure and effective, modern healthcare
technologies. It is not only the driving force
behind everyday products like smartphones and
computers, but it is also what helps keep our
nation safe and less dependent on foreign
countries,” the American Chemistry Council
(ACC) said in a statement congratulating Trump
on his victory.
“To meet that demand and protect America’s
future, we will work with the Trump
administration and new Congress to commit to
policies that support growing domestic chemical
production right here at home,” the group said.
The Alliance for Chemical Distribution (ACD)
also congratulated Trump and said it looked
forward to working with the administration and
Congress to provide regulatory certainty,
strengthen chemical security and renew trade
programs.
The ACD did not specify the trade programs.
However, the chemical industry has long
advocated the revival of two programs, the
Generalized System of Preferences (GSP) and
the Miscellaneous Tariff Bill (MTB).
The GSP eliminated duties on thousands of
products from more than 100 developing
countries. The MTB temporarily reduced or
suspended import tariffs on specific products.
In regards to security, the ACC and the ACD
have urged Congress to revive the nation’s main
anti-terrorism program for chemical sites,
which is known as the Chemical Facility
Anti-Terrorism Standards (CFATS).
The program helped the chemical industry
protect their plants, warehouses and
distribution centers from terrorist attacks.
Because CFATS was a federal program, it
discouraged the proliferation of individual
state programs, which would have increased
compliance costs.
The ACD and the ACC have warned about the surge
in regulations that occurred under the
administration of US President Joe Biden. Many
of them have provided the industry with little
benefit while increasing compliance costs.
The American Fuel & Petrochemical
Manufacturers (AFPM) also congratulated Trump.
“The US needs strong refining, petrochemical
and midstream energy industries, and
that requires a policy environment that
allows American energy to compete globally,
innovate for consumers and extend US energy
leadership and security for the betterment of
the American people,” said Chet Thompson, CEO
of the AFPM.
(adds AFPM’s comments, paragraph 11)
Global News + ICIS Chemical Business (ICB)
See the full picture, with unlimited access to ICIS chemicals news across all markets and regions, plus ICB, the industry-leading magazine for the chemicals industry.
Ethylene06-Nov-2024
SAO PAULO (ICIS)–Brazil’s
petrochemicals-intensive automotive sector
posted in October its best sales since 2014 at
nearly 265,000 units, the country’s trade group
Anfavea said on Wednesday.
Healthy sales at home propped up output, which
stood at nearly 250,000 units during October
and was also propped by overseas sales, with
exports rising during the month, compared with
September.
Year-to-date in October, however, exports still
register a negative reading of more than 7%,
when compared with the same 10-month period of
2023, as key trading partners such as Argentina
remain in financial trouble, reducing
consumers’ purchases of Brazilian-manufactured
vehicles.
“Although this was the second-best month of the
year in terms of production, we are still below
the registrations, due to the high volume of
imports,” said Anfavea’s president, Marcio de
Lima, focusing on an issue – imports from
China, specifically – which the trade group
have been raising alarms for much of this year.
In July, Anfavea said several producers with
facilities in Brazil – most of them the
traditional, established players – are pointing to an
“uncontrolled” influx of cars manufactured
overseas which are hitting domestic producers’
market share.
China-produced vehicles, most of them electric
or hybrid, are quickly gaining market share in
Brazil and elsewhere in Latin America. Anfavea
called on the government to establish tariffs
as other jurisdictions – the US or the EU –
have done on China-manufactured vehicles.
“Another good news in October was the increase
of 7,000 direct jobs in the last 12 months,
with the potential to generate another 70,000
jobs in the automotive chain. This is the
indicator that makes us happiest, as we have
great responsibility for the approximately 1.2
million workers in the automotive sector,” said
De Lima.
Brazil automotive
October
September
Change
January-October 2024
January-October 2023
Change
Production
249,200
230,000
8.3%
2,123,400
1,950,600
8.9%
Sales
264,900
236,300
12.1%
2,124,000
1,847,500
15%
Exports
43,500
41,600
4.6%
327,800
354,200
-7.4%
The automotive industry is a major global
consumer of petrochemicals, which make up more
than one-third of the raw material costs of an
average vehicle.
The automotive sector drives demand for
chemicals such as polypropylene (PP), along
with nylon, polystyrene (PS), styrene butadiene
rubber (SBR), polyurethane (PU), methyl
methacrylate (MMA) and polymethyl methacrylate
(PMMA).
Speciality Chemicals06-Nov-2024
LONDON (ICIS)–Europe markets tumbled in
afternoon trading on Wednesday, reversing
earlier gains as the euro fell in value against
the US dollar amid fears over the introduction
of fresh tariff measures by the incoming US
administration.
A robust start to the day by Europe stock
exchanges reversed course as trading continued.
A speedy resolution to a US political fight
that had been expected to be closer-fought and
potentially take longer to be decided reassured
investors, but a surging dollar and jitters
over the potential for fresh duties on exports
to Europe unsettled traders.
Robust trading goosed stock valuations across
Europe shortly after press called the election
for Donald Trump, with bouses in Germany,
France and the UK up 0.85%-1.15%
That rally subsided over the course of the day
as a surging dollar and tariff worries
unsettled markets, with the value of the euro
dropping 2 cents against the dollar, from
$1.09:€1 on Tuesday evening to $1.07:€1 in
afternoon trading on Wednesday.
Germany’s DAX index was trading down 1.18%
while France’s CAC 40 had shed 0.83% of its
value and the UK FTSE 100 slumped 0.23% as of
16:13 GMT.
Particularly hard-hit were German automaker
stocks, with Volkswagen shares plunging 5.70%,
Porsche down 4.54%, BMW plummeting 6.47% and
Mercedes-Benz shares dropping 6.44% on fears of
steeper tariffs on vehicle exports to the US.
The new president-elect, the first person to
win two non-consecutive terms in office, had
spoken on the campaign trail of plans for
additional import tariffs, particularly for
China but also for Europe.
Donald Trump has set out plans to impose
tariffs of up to 20% on all external trading
partners and 60% on products from China, which
economics institute Ifo estimated could cost
Germany-based businesses €33 billion per year
if they are introduced.
Germany-based chemicals trade body VCI on
Wednesday stated that businesses in both
Germany and the EU need
to diversify trade flows along with
improving international competitiveness, due to
the prominence of the US as a destination.
The US is Germany’s second-largest trading
partner after the EU.
“For firms, uncertainty over the US tariff
regimes for their industry and the risk of
retaliatory measures by policymakers elsewhere
will clearly be a huge problem when forward
planning,” said Oxford Economics director of
global macro research Ben May.
“This, combined with potentially higher
borrowing costs, could be a strong disincentive
to delay or cancel investment,” he added.
US markets are substantially more bullish at
present, with the Dow and Nasdaq trading up
3.15% and 2.02% as of 16:34.
Canada exchanges booked more modest increases,
while central and southern American exchanges
fared worse, with the Brazil Stock Exchange
Index and Mexico’s S&P/BMV IPC index
trading down.
Acrylonitrile06-Nov-2024
LONDON (ICIS)–Relatively flat demand trends
and evolving global supply dynamics evident in
H2 2024 are expected to largely persist within
the European acrylonitrile-butadiene-styrene
(ABS) and acrylonitrile (ACN) markets in Q1
2025.
In this latest podcast, Europe ABS report
editor Stephanie Wix and her counterpart on the
Europe ACN report, Nazif Nazmul, share the
latest developments and expectations for what
lies ahead.
Macroeconomic challenges expected to
continue limiting ABS and ACN demand through Q4
into Q1 2025
ABS and ACN availability likely to remain
lengthy
Import-led ABS competition could increase
in Q1 2025
ABS is the largest-volume engineering
thermoplastic resin and is used in automobiles,
electronics and recreational products.
ACN is used in the production of synthetic
fibres for clothing and home furnishings,
engineering plastics and elastomers.
Ethylene06-Nov-2024
HOUSTON (ICIS)–US President-Elect Donald Trump
has pledged to impose more tariffs, lower
corporate taxes and lighten companies’
regulatory burden, a continuation of what US
chemical producers saw during his first term of
office in 2016-2020.
More tariffs could leave chemical exports
vulnerable to retaliation because of their
magnitude and the size of the global supply
glut.
Trump pledged to reverse the surge in
regulations that characterized term of
President Joe Biden.
Lower corporate taxes could benefit US
chems, but longer term, rising government debt
could keep interest rates elevated and prolong
the slump in housing and durable goods.
MORE TARIFFSTrump
pledged to add more tariffs to the ones he
introduced during his first term as president,
as show below.
Baseline tariffs of 10-20%,
mentioned during an August 14 rally in
Asheville, North Carolina.
Tariffs of 60% on imports from China.
A reciprocal trade act, under which the
US would match tariffs imposed on its
exports.
WHY TRADE POLICY MATTERS FOR
CHEMICALSTrade policy is
important to the US chemical industry because
producers purposely built excess capacity to
take advantage of cheap feedstock and
profitably export material abroad. Such large
surpluses leave US chemical producers
vulnerable to retaliatory tariffs.
The danger is heightened because the world has
excess capacity of several plastics and
chemicals, and plants are running well below
nameplate capacity.
At the least, retaliatory tariffs would
re-arrange supply chains, adding costs and
reducing margins.
At the worst, the retaliatory tariffs would
reach levels that would make US exports
uncompetitive in some markets. Countries with
plants running below nameplate capacity could
offset the decline in US exports by raising
utilization rates.
Baseline tariffs would hurt US chemical
producers on the import side. The US has
deficits in some key commodity chemicals,
principally benzene, melamine and methyl ethyl
ketone (MEK).
In the case of benzene, companies will not
build new refineries or naphtha crackers to
produce more benzene. Buyers will face higher
benzene costs, and those costs will trickle
down to chemicals made from benzene.
Tariffs on imports of oil would raise costs for
US refiners because they rely on foreign
shipments of heavier grades to optimize
downstream units.
The growth in US oil production is in lighter
grades from its shale fields, and these lighter
grades are inappropriate for some refining
units.
REGULATORY RELIEFUnder
Trump, the US chemical industry should get a
break from the surge in regulations that
characterized the Biden administration.
The flood led the Alliance for Chemical
Distribution (ACD) to call the first half of
2024 the worst regulatory climate ever for the
chemical industry. The American Chemistry
Council (ACC) has warned about
the dangers of excessive regulations and
urged the Biden administration to create a
committee to review the effects new proposals
could have on existing policies.
Trump said he would re-introduce his policy of
removing two regulations for every new one
created.
Trump has
a whole section of his website dedicated to
what he called the “wasteful and job-killing
regulatory onslaught”. One plank of the
platform of the Republican Party is to “cut
costly and burdensome regulations”.
LOWER TAXES AT EXPENSE OF
DEFICITTrump pledged to make
nearly all of the 2017 Tax Cuts and Jobs Act
(TCJA) permanent and add the following new tax
cuts,
according to the Tax Foundation, a policy
think tank.
Lower the corporate tax rate for domestic
production to 15%.
Eliminate green energy subsidies in the
Inflation Reduction Act (IRA).
Exempt tips, Social Security benefits and
overtime pay from income taxes.
At best, the resulting economic growth, the
contributions from tariffs and cuts in
government spending would offset the effects of
the tax cuts. The danger is that the tariffs,
the cuts and the growth growth are insufficient
to offset the decline in revenue that results
from the tax cuts.
The Tax Foundation
is forecasting the latter and expects that
that the 10-year budget deficit will increase
by $3 trillion.
To fund the growing deficit, the US government
will issue more debt, which will increase the
supply of Treasury notes and cause their price
to drop. Yields on debt are inversely related
to prices, so rates will increase as prices
drop.
Economists have warned that a growing
government deficit will maintain elevated rates
for 10-year Treasury notes, US mortgages and
other types of longer term debt.
Higher rates have caused some selective
defaults among chemical companies and led to a
downturn in housing and durable goods, two key
chemical end markets.
If the US deficit continues to grow and if
interest rates remain elevated, then more US
chemical companies could default and producers
could contend with a longer downturn in housing
and durable goods.
A second post-election insight piece,
covering the future landscape for energy
policy, will run on Thursday at 08:00 CST.
Front page picture: The US Capitol in
Washington
Source: Lucky-photographer
Insight article by Al
Greenwood
Ethylene05-Nov-2024
SAO PAULO (ICIS)–Brazil’s private sector
posted in October the fastest rate of expansion
since mid-2022, analysts at S&P Global said
on Tuesday.
S&P’s composite PMI index stood in October
at a very healthy 55.6 points, up from
September’s 55.2 points. Any reading above 50.0
points shows economic expansion.
S&P compiles the composite PMI index
putting together the manufacturing and services
indices, according to each’s weight in the
economy.
Last week, S&P said Brazil’s
petrochemicals-intensive manufacturing sectors had
performed well in October thanks to a
healthy order book, both in the domestic market
as well as abroad, with export orders rising.
This week, the analysts said the services
sectors – which are predominant in the economy
– had also posted healthy performance in
October, with the index at 56.2 points, up from
55.8 points in September.
COMPOSITE PMI“Stronger
increases in both factory production and
services activity fueled growth of Brazilian
private sector output … The main determinant of
growth was a substantial improvement in demand
for goods and services. Aggregate sales
increased at the quickest pace in 28 months,
spurred by a faster increase in the service
economy,” said S&P.
“Less encouragingly, employment data showed the
joint weakest rise in private sector jobs since
October 2023. Manufacturers hired staff at the
slowest pace for 10 months, while cost
considerations at service providers led to a
broad stagnation of recruitment efforts. Input
costs at the composite level rose at the
weakest rate in four months, reflecting a
notable slowdown in the manufacturing
industry.”
BRAZIL MANUFACTURING PMI
October
September
August
July
June
May
April
March
February
January
December 2023
November
PMI index
52.9
53.2
50.4
54.0
52.5
52.1
55.9
53.6
54.1
52.8
48.4
49.4
Source: S&P Global
Polyethylene Terephthalate05-Nov-2024
HOUSTON (ICIS)–US polyester film producer
Polyplex expects the expansion project at its
Decatur, Alabama, production facility to start
up in the first quarter of 2025, according to
market participants at this year’s PackExpo.
The site has added a new biaxially oriented
polyethylene terephthalate (BOPET) line with an
annual capacity of 50,000 tonnes.
Additionally, they have increased resin
capacity from 58,000 to 86,000 tonnes for
captive consumption, according to a press
release from the company.
The site is expected to reduce lead times for
PET film in the US, which is currently a net
importing market.
PackExpo runs through Wednesday.
PET resins can be broadly classified into
bottle, fibre or film grade, named according to
the downstream applications. Bottle grade resin
is the most commonly traded form of PET resin
and it is used in bottle and container
packaging through blow molding and
thermoforming. Fibre grade resin goes into
making polyester fibre, while film grade resin
is used in electrical and flexible packaging
applications.
PET can be compounded with glass fibre for the
production of engineering plastics.
DAK Americas, Indorama, Nan Ya Plastics
Corporation and Far Eastern New Century (FENC)
are PET producers in the US.
Contact us
Partnering with ICIS unlocks a vision of a future you can trust and achieve. We leverage our unrivalled network of industry experts to deliver a comprehensive market view based on independent and reliable data, insight and analytics.
Contact us to learn how we can support you as you transact today and plan for tomorrow.