SAO PAULO (ICIS)–Brazil’s foreign trade committee Gecex has postponed a meeting where it was expected to decide on imposing antidumping duties (ADDs) polyethylene (PE) imports from the US and Canada. The decision has created uncertainty in the country’s PE market, which widely expected the ADDs to be implemented from June. In a note on its website, Gecex stated the “meeting will be rescheduled” but offered no further details. A spokesperson for Gecex said to ICIS it did not have any further information to offer. Gecex’s meeting this week planned to discuss its investigation into allegations by Braskem, Brazil’s sole PE producer, that US and Canadian producers are exporting PE to Brazil below fair market value. According to market sources, Braskem had already been communicating to customers price increases on the back of the expected ADDs. Earlier this week, Gecex increased ADDs on US polyvinyl chloride (PVC) from from 8.2% to 43.7%. Gecex is also investigating potential polyethylene terephthalate (PET) dumping from Malaysia and Vietnam, following ADDs proposals by Indorama and Alpek. The plastics transformation sector in Brazil said ADDs in place and those potentially implemented in the near future increase costs for all major thermoplastic resins, raising input costs for manufacturers. Unsurprisingly, the trade group representing producers Abiquim said the fears about higher costs due to ADDs “do not hold up” when taking into account a beleaguered chemicals production sector with historically low operating rates. Front page picture: Port of Santos in Sao Paulo, Latin America’s largest Source: Port of Santos Authority

LONDON (ICIS)–BASF will become the sole owner of Alsachimie, taking over the shares of former joint venture partner DOMO Chemicals, the German major announced on Wednesday. Currently, BASF holds 51% of the shares and is set to buy DOMO’s 49% stake in the company which, subject to consultations with relevant social bodies of Alsachimie, will close by mid-2025. Alsachimie was founded by the two companies in February 2020 and situated on the French-German border, producing key materials for polyamides, including KA-oil, adipic acid and hexamethylenediamine adipate (AH salt). The purchase would complement BASF’s nylon 6,6 precursor production at its site in Chalampe, France, and enable further backward integration into key raw materials for the value chain in Europe. “By taking over the shares of our partner DOMO Chemicals, we are further strengthening our leading position and long-term commitment to the nylon 6,6 value chain and paving the way for future growth with our customers in industries such as automotive and textiles,” said BASF board member Stephan Kothrade. “The intended transaction aligns with our strategy to continue to focus on delivering tailored polyamide solutions in the core segments automotive, consumer goods, industrial and electrical & electronics industries,” said DOMO Chemicals CEO Yves Bonte.

BARCELONA (ICIS)–ExxonMobil is selling its refinery at Gravenchon, France, to Canadian refining group North Atlantic. The two companies have entered exclusive negotiations for North Atlantic to acquire an 82.89% controlling interest in Esso Société Anonyme Française SA and 100%  of ExxonMobil Chemical France. Filing of a tender offer is expected in the first quarter of 2026 for the deal which includes Exxon’s refinery at the Gravenchon site, the second largest refinery in France. The  transaction will be submitted to local trade unions in accordance with French law. In 2024, ExxonMobil sold its Fos-Sur-Mer refinery near Marseille, France, along with fuel terminals in Toulouse and Villette. The company also closed its cracker and downstream production  at Gravenchon in 2024. At the time, the company said the site had lost more than €500 million since 2018 and despite efforts to improve the site’s economics, it remained uncompetitive. According to the ICIS Supply & Demand Database ExxonMobil still has some small chemicals capacities at Gravenchon and nearby Port Gerome including propylene, polyalphaolefins and oligomers. Local trades union, CSEC, said in a press release that ExxonMobil would market chemicals and specialty products on behalf of the new owners. ExxonMobil did not reply to a request for confirmation of this. It also has large base oils capacities in France including 12,000 barrels/day at Port Jerome and 3,200 barrels/day at Gravenchon. In a statement released on 28 May, North Atlantic said it has the ambition to consolidate Gravenchon as a center of French energy and industry for decades and to grow North Atlantic into a transatlantic energy champion. Located on a 1,500-acre site in the Normandy region of France, the combined facility is one of the largest integrated chemical complexes in western Europe. The refinery includes two distillation trains, several conversion units and associated logistics facilities. The site has the capacity to process 230,000 barrels/day of crude oil and other feedstocks, according to North Atlantic. North Atlantic said it aims to develop Gravenchon into a green energy hub to accelerate the deployment of low-carbon fuels and renewable power. The company said it is committed to maintain employment and existing compensation and benefits. Ted Lomond, president and CEO of North Atlantic and president of North Atlantic France said: “This is a pivotal moment for North Atlantic as we enhance our transatlantic presence and commitment to energy security through innovative energy solutions aligned with global energy needs”. Ajay Parmar, ICIS director of energy and refining said: “My view is that Exxon is choosing to sell assets where profitability has been and likely will continue to be dented going forward. Refinery margins in Europe have returned back to around their pre-COVID levels this year, after a few years of bumper profits post-pandemic.” He added: “These refinery assets are less profitable and so the company is probably looking to divest for this reason. Exxon/Esso also sold off the Fos-Sur-Mer refinery last year – I think the strategy is to steadily exit these lower margin businesses.” Photo: Part of an oil refinery complex (Shutterstock) Focus article by Will Beacham

SAO PAULO (ICIS)–Brazil has approved plans to raise antidumping duties (ADDs) on polyvinyl chloride (PVC) imports from the US from 8.2% to 43.7%. The decision, taken late Tuesday, implements one of Brazil’s highest ADDs rates. The sharp hike in duties was taken after a proposal filed in 2024 by local polymers major Braskem and caustic soda and chlorine derivatives producer Unipar, Brazil’s main PVC producers. “The proposal to increase in ADDs applied to imports of suspension polyvinyl chloride (PVC) resin originating in the US was granted, due to a change in circumstances, from 8.2% to 43.7%,” said Gecex, Brazil’s body in charge of foreign trade. Gecex is also investigating potential polyethylene (PE) dumping from the US, a proposal brought forward by Braskem, as well as potential polyethylene terephthalate (PET) dumping from Malaysia and Vietnam, following proposals by Indorama and Alpek. The plastics transformation sector in Brazil has said ADDs in place and those potentially implemented in the near future are increasing costs for all major thermoplastic resins, raising input costs for manufacturers. Unsurprisingly, the trade group representing producers Abiquim has said the fears about higher costs due to ADDs “do not hold up” when taking into account a beleaguered chemicals production sector with historic low operating rates.

SAO PAULO (ICIS)–Fears within the Brazilian manufacturing sector about rising input costs and higher inflation if antidumping duties (ADDs) are imposed on US and Canadian polyethylene (PE) “do not hold up” when taking into account a beleaguered chemicals production sector, according to trade group Abiquim. A spokesperson for the trade group, which largely represents the chemicals producing side, said the low operating rates across the country’s chemical plants were partly a result of unfair global competition, and fully supported ADDs being imposed on US and Canadian PE. Brazil’s government body for foreign trade, the Foreign Trade Chamber (Gecex), is to meet on 29 May to take a decision on the matter. The investigation into possible PE dumping by the US and Canada started in November after a proposal by local polymers major Braskem, which has a commanding voice in Abiquim. “The narrative that specific anti-dumping duties, applied to correct unfair trade operations, could pose inflationary risks in the plastics processing production chain and affect production levels in the economy as a whole, simply does not hold up, given that Brazil is a price taker in thermoplastic resins (i.e. it follows variations in the international market),” said Abiquim. “[Moreover] There is an average idle capacity of 36% in the Brazilian chemicals sector (data from 2024) that can be reversed with the implementation of ADDs. Trade defence investigations in Brazil follow a rigorous and technical procedure, focusing on determining dumping margins, damage to the domestic industry and the causal link between the two.” If those technical parameters are met, Gecex will implement the ADDs “in the interest” of the country, adding that the ADDs would strictly follow World Trade Organization (WTO) rules regarding unfair trade. “Allowing dumping is not justified by any reason, since it allows the distortion of international trade rules, allowing the sale of products often below production cost only to aggressively capture the market,” added Abiquim. GROWING PROTECTIONISMHowever, trade groups representing import-heavy manufacturing companies, in a country where half of chemicals demand is covered by imports, have warned that those ADDs and other protectionist measures implemented by Luiz Inacio Lula da Silva’s administration increase input costs and, ultimately, inflation. The truth is that Lula’s cabinet does listen to industrial producers. The main constituency of the president’s Workers’ Party (PT) is industrial workers, and the health of manufacturing employment is key for its electoral prospects. As the 2026 general election looms, those voters may consider their support for the PT if manufacturing, which already came late to the post-pandemic recovery compared with other sectors, starts faltering again in 2025. This is precisely the argument from the other side. Increasing costs manufacturers could their hit their activity and ultimately employment in manufacturing as a whole could be negatively affected. In a written statement to ICIS this week, Jose Ricardo Roriz, president of the trade group representing plastic transformers Abiplast, reaffirmed his opposition to protectionist measures which increase costs for importers. But that side of the argument has so far failed to turn its lobbying into concrete actions. Since he took office in January 2023, Lula’s cabinet has approved most of the protectionist measures chemical producers demanded. In 2023, it reintroduced a tax break for the purchase of inputs by chemical companies, called REIQ, which was withdrawn by the previous center-right administration. In 2024, the administration re-imposed ADDs on US-origin PP and approved higher import tariffs on dozens of chemicals. Meanwhile, Gecex is investigating another proposal to implement ADDs on polyvinyl chloride (PVC), a proposal by Braskem and caustic soda and chlorine derivatives producer Unipar. In April, Gecex also began a probe into potential polyethylene terephthalate (PET) dumping from Malaysia and Vietnam, a proposal brought forward by Indorama and Alpek. Brazil’s Congress is currently debating a bill contemplating state subsidies or credit lines at a favorable rate for chemicals companies, called Presiq. If approved, the program could be the “savior” of struggling chemicals producers, according to Abiquim’s director general Andre Passos in an interview with ICIS.

HOUSTON (ICIS)–The US delay of its proposed 50% tariffs on EU imports will still leave its polymers vulnerable to retaliatory tariffs. The new deadline is 9 July. For US exports, the EU has already drafted a list of targets for retaliatory tariffs, part of its second round of €95 billion in tariffs on US imports. A full list of all the proposed imports can be found here. This is on top of the first round of €21 billion in tariffs on US imports. A full list of all the proposed imports can be found here. In all, the EU could impose tariffs on nearly every major polymer from the US, including polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC) and polyethylene terephthalate (PET). The EU is also considering tariffs on US imports of surfactants, fatty acids, fatty alcohols, and tall oil, a feedstock used to make renewable diesel, sustainable aviation fuel (SAF) and renewable naphtha. The following table lists some of the many plastics and chemicals proposed on the EU’s second round of tariffs. CN CODE DESCRIPTION 28151200 sodium hydroxide “caustic soda” in aqueous solution “soda lye or liquid soda” 29053926 butane-1,4-diol or tetramethylene glycol [1,4-butanediol] having a bio-based carbon content of 100% by mass 29091910 tert-butyl ethyl ether (ethyl-tertio-butyl-ether, etbe) 29152100 acetic acid 29153200 vinyl acetate 29291000 isocyanates 32061100 pigments and preparations based on titanium dioxide of a kind used for colouring any material or produce colorant preparations, containing >= 80% by weight of titanium dioxide calculated on the dry matter (excl. preparations of heading 3207, 3208, 3209, 3210, 3212, 3213 and 3215) 32061900 pigments and preparations based on titanium dioxide of a kind used for colouring any material or produce colorant preparations, containing < 80% by weight of titanium dioxide calculated on the dry matter (excl. preparations of heading 3207, 3208, 3209, 3210, 3212, 3213 and 3215) 34023100 linear alkylbenzene sulphonic acids and their salts 34023990 anionic organic surface-active agents, whether or not put up for retail sale (excl. linear alkylbenzene sulphonic acids and their salts, and aqueous solution containing by weight 30-50% of disodium alkyl [oxydi(benzenesulphonate)]) 34024100 cationic organic surface-active agents, whether or not put up for retail sale 34024200 non-ionic organic surface-active agents, whether or not put up for retail sale (excl. soap) 34024900 organic surface-active agents, whether or not put up for retail sale (excl. soap, anionic, cationic and non-ionic) 34025010 surface-active preparations put up for retail sale (excl. organic surface-active preparations in the form of bars, cakes, moulded pieces or shapes, and organic surface-active products and preparations for washing the skin in the form of liquid or cream) 38030010 crude tall oil 38030090 tall oil, whether or not refined (excl. crude tall oil) 38170050 linear alkylbenzene 38170080 mixed alkylbenzenes and mixed alkylnaphthalenes, produced by the alkylation of benzene and naphthalene (excl. linear alkylbenzene and mixed isomers of cyclic hydrocarbons) 38231100 stearic acid, industrial 38231200 oleic acid, industrial 38231300 tall oil fatty acids, industrial 38231910 fatty acids, distilled 38231930 fatty acid distillate 38231990 fatty acids, industrial, monocarboxylic; acid oils from refining (excl. stearic acid, oleic acid and tall oil fatty acids, distilled fatty acids and fatty acid distillate) 38237000 fatty alcohols, industrial 38260010 fatty-acid mono-alkyl esters, containing by weight => 96,5 % of esters “famae” 38260090 biodiesel and mixtures thereof, not containing or containing < 70 % by weight of petroleum oils or oils obtained from bituminous minerals (excl. fatty-acid mono-alkyl esters containing by weight >= 96,5 % of esters “famae”) 39013000 ethylene-vinyl acetate copolymers, in primary forms 39019080 polymers of ethylene, in primary forms (excl. polyethylene, ethylene-vinyl acetate copolymers, ethylene-alpha-olefins copolymers having a specific gravity of < 0,94, ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid and a-b-a block copolymer of ethylene of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight <= 35% of styrene, in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms) 39021000 polypropylene, in primary forms 39023000 propylene copolymers, in primary forms 39029010 a-b-a block copolymer of propylene or of other olefins, of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight <= 35% of styrene, in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms 39029020 polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight <= 10% of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight <= 10% of polyethylene and/or <= 25% of polypropylene, in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms 39031100 expansible polystyrene, in primary forms 39031900 polystyrene, in primary forms (excl. expansible) 39032000 styrene-acrylonitrile copolymers “san”, in primary forms 39033000 acrylonitrile-butadiene-styrene copolymers “abs”, in primary forms 39039090 polymers of styrene, in primary forms (excl. polystyrene, styrene-acrylonitrile copolymers “san”, acrylonitrile-butadiene-styrene “abs”, copolymer solely of styrene with allyl alcohol, of an acetyl value of >= 175 and brominated polystyrene, containing by weight >= 58% but <= 71% of bromine, in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms) 39041000 poly”vinyl chloride”, in primary forms, not mixed with any other substances 39042100 non-plasticised poly”vinyl chloride”, in primary forms, mixed with other substances 39042200 plasticised poly”vinyl chloride”, in primary forms, mixed with other substances 39051200 poly”vinyl acetate”, in aqueous dispersion 39051900 poly”vinyl acetate”, in primary forms (excl. in aqueous dispersion) 39052100 vinyl acetate copolymers, in aqueous dispersion 39052900 vinyl acetate copolymers, in primary forms (excl. in aqueous dispersion) 39053000 poly”vinyl alcohol”, in primary forms, whether or not containing unhydrolyzed acetate groups 39061000 poly”methyl methacrylate”, in primary forms 39071000 polyacetals, in primary forms 39072911 polyethylene glycols, in primary forms 39072920 polyether alcohols, in primary forms (excl. bis(polyoxyethylene) methylphosphonate and polyethylene glycols) 39072999 polyethers in primary forms (excl. polyether alcohols, polyacetals and copolymer of 1- chloro-2,3-epoxypropane with ethylene oxide) 39073000 epoxide resins, in primary forms 39074000 polycarbonates, in primary forms 39075000 alkyd resins, in primary forms 39076100 poly”ethylene terephthalate”, in primary forms, having a viscosity number of >= 78 ml/g 39076900 poly”ethylene terephthalate”, in primary forms, having a viscosity number of < 78 ml/g 39079110 unsaturated liquid polyesters, in primary forms (excl. polycarbonates, alkyd resins, poly”ethylene terephthalate” and poly”lactic acid”) 39079190 unsaturated polyesters, in primary forms (excl. liquid, and polycarbonates, alkyd resins, poly”ethylene terephthalate” and poly”lactic acid”) 39079980 polyesters, saturated, in primary forms (excl. polycarbonates, alkyd resins, poly”ethylene terephthalate”, poly”lactic acid”, poly”ethylene naphthalene-2,6-dicarboxylate” and thermoplastic liquid crystal aromatic polyester copolymers) 39089000 polyamides, in primary forms (excl. polyamides-6, -11, -12, -6,6, -6,9, -6,10 and -6,12) 39091000 urea resins and thiourea resins, in primary forms 39092000 melamine resins, in primary forms 39093100 poly”methylene phenyl isocyanate” “crude mdi, polymeric mdi”, in primary forms 39094000 phenolic resins, in primary forms 39095010 polyurethane of 2,2′-“tert-butylimino”diethanol and 4,4′-methylenedicyclohexyl diisocyanate, in the form of a solution in n,n-dimethylacetamide, containing by weight >= 50% of polymer 39095090 polyurethanes in primary forms (excl. polyurethane of 2,2′-“tert-butylimino”diethanol and 4,4′-methylenedicyclohexyl diisocyanate, in the form of a solution in n,ndimethylacetamide) Source: EU CN CODE DESCRIPTION 39011010 linear polyethylene with a specific gravity of < 0,94, in primary forms 39011090 polyethylene with a specific gravity of < 0,94, in primary forms (excl. linear polyethylene) 39012010 polyethylene in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms, of a specific gravity of >= 0,958 at 23°c, containing <= 50 mg/kg of aluminium, <= 2 mg/kg of calcium, of chromium, of iron, of nickel and of titanium each and <= 8 mg/kg of vanadium, for the manufacture of chlorosulphonated polyethylene 39012090 polyethylene with a specific gravity of >= 0,94, in primary forms (excl. polyethylene in blocks of irregular shape, lumps, powders, granules, flakes and similar bulk forms, of a specific gravity of >= 0,958 at 23°c, containing <= 50 mg/kg of aluminium, <= 2 mg/kg of calcium, of chromium, of iron, of nickel and of titanium each and <= 8 mg/kg of vanadium, for the manufacture of chlorosulphonated polyethylene) 39014000 ethylene-alpha-olefin copolymers, having a specific gravity of < 0,94 , in primary forms 39081000 polyamides-6, -11, -12, -6,6, -6,9, -6,10 or -6,12, in primary forms Source: EU

SAO PAULO (ICIS)–The plastics transformation sector in Brazil is facing increased costs for all major thermoplastic resins as antidumping investigations target imports from key supplier countries, the president of trade group Abiplast told ICIS. Jose Ricardo Roriz said potential antidumping duties (ADDs) against polyethylene (PE) imports from the US and Canada, for which a final decision could be made as soon as this week, will raise cost pressures in the manufacturing sector. The government body that focuses on overseas trade, the Foreign Trade Chamber (Gecex), will meet on 29 May and several sources expect it to make a decision on ADDs during the meeting. The proposal for ADDs on US and Canadian PE was brought forward by polymers major Braskem in July 2024, prompting Gecex to open its probe in November 2024. If approved, the ADDs will complete antidumping coverage on all principal thermoplastic resins used in manufacturing, including PE, polypropylene (PP), polyvinyl chloride (PVC) and polyethylene terephthalate (PET). “The impact [of the ADDs on PE] will create pressure on costs, which ultimately affects not only the plastic transformation sector, but all industrial chains that use these products as inputs,” said Roriz. If enforced, the duties will pose a significant challenge for the manufacturing sector which relies heavily on imported resins to produce a wide range of products including construction, automotives, packaging and consumer goods. Roriz said the ADDs or other trade defense mechanisms are being misused and reiterated Abiplast’s staunch opposition to them. “We are against these movements that turn trade defense instruments into simple tools for closing and reserving markets,” he said. GROWING PROTECTIONISMGecex is investigating another proposal for PVC ADDs brought about by Braskem and caustic soda and chlorine derivatives producer Unipar, who claim they are subject to unfair competition. In April, Gecex also began a probe into potential PET dumping from Malaysia and Vietnam, a proposal brought forward by Indorama and Alpek. In the meantime, the Brazilian government re-imposed ADDs on US-origin PP last year. In 2023, it reintroduced a tax break for the purchase of inputs by chemical companies, called REIQ, which was withdrawn by the previous centre-right administration. In October 2024, the government approved higher import tariffs on dozens of chemicals. Earlier this year, it also approved programs contemplating state subsidies or credit lines at a favorable rate for chemicals companies such as Presiq.

LONDON (ICIS)–Click here to see the latest blog post on Chemicals & The Economy by Paul Hodges, which looks at the impact of rising interest rates on key chemicals markets – housing and autos. Editor’s note: This blog post is an opinion piece. The views expressed are those of the author and do not necessarily represent those of ICIS. Paul Hodges is the chairman of consultants New Normal Consulting.

SINGAPORE (ICIS)–Singapore’s chemicals production declined 3.2% year on year in April amid tariff-led front-loading, official data showed on 26 May, while a pause in ‘reciprocal’ tariffs could support further growth in H2 2025. Petrochemicals production falls 3.4% in April year on year Overall chemicals cluster output down 3.1% in Jan-Apr 2025 GDP forecast of 2.0% in anticipation of fiscal measures – Nomura The “other chemicals” segment grew 4.1%, driven by increased fragrance output for consumer products, while petrochemicals, petroleum and specialties segments declined by 3.4%, 4.6% and 5.7% respectively last month, the Economic Development Board (EDB) said. High inventory drove declines in petrochemicals and petroleum refined products output, and maintenance shutdowns affected the production of mineral oil additives in the specialties sector. Overall, the chemicals cluster’s output declined by 3.1% in the first four months of 2025 compared to the same period last year. Singapore is a leading petrochemical manufacturer and exporter in southeast Asia, with more than 100 international chemical companies, including ExxonMobil and Shell, based at its Jurong Island hub. Overall, general manufacturing output grew 5.9% year on year in April, declining from the 6.8% growth figure recorded in March. Excluding biomedical manufacturing, output rose by 8.1%. On a three-month moving average basis, overall output rose by 4.6% compared to the same period last year. Seasonally adjusted month-on-month figures showed a 5.3% increase in April, and excluding biomedical manufacturing, a 4.7% increase. “Growth momentum in the second half of 2025 could continue to experience some bouts of resilience given the current pause on reciprocal tariffs and … truce on US-China trade tensions opens a window for continued front-loading by exporters,” said Jester Koh, Associate Economist at Singapore-based UOB Global Economics & Markets Research. However, Koh warned of “payback effects” from front-loading that could result in an even more protracted decline in trade and manufacturing activity in the later half of the year, and into the first half of 2026. UOB raised Singapore’s 2025 growth forecast to 1.7% from 1.5% previously, but lowered its 2026 growth projection to 1.4%, from 1.6%. Concurring with Singapore’s own GDP growth forecast of 0-2% for 2025, Nomura maintained their forecast of 2.0%, in anticipation of large fiscal support measures, which would be worth around 1.0% of GDP. Focus article by Jonathan Yee